Jeep KK

Jeep Liberty KK
  • Frequently Asked Questions

    Our customers most Frequently Asked Questions

    A-arm / Ball Joint install

    1. Bolts and nut tork spec
    2. Stud spins in steering knuckle
    3. Grease

     

    Get live shipping quotes on JBA web site from Marlin Gehman on Vimeo.

    Overseas shipments

    1. Yes, we ship our parts all over the world
    2. Get live shipping quotes on JBA web sites

     

    If you have product related questions post them below and we will post the answer to help all our customers.

  • ESP Reset after a front-end alignment

    Got some useful info from our Hunter Alignment Machine guy about ESP and alignments. This applies to all ESP equipped vehicles and not just Jeeps. If you have a alignment and toe adjustments are required and you have ESP the steering angle sensor must be adjusted or unusual ESP operation can result, not always but sometimes you can get unwanted operation. Come Jan 1st 2012 every vehicle sold in the US must have ESP as standard equipment, and all Jeeps have it standard as of 2006.There has been some reports of unwanted operation of ESP that has caused some issues. As of this month every Firestone(nationwide) will have the ability to reset most steering angle sensors, not all but most and the ones that cannot be done must be reset at a dealership as they require there specific scanners. Some vehicles will require the battery to be disconnected for the reset and a "battery saver" cannot be used to save stuff like radio memory or the reset will not work so if your vehicle has a "anti-theft" radio that requires a code to unlock make sure you have that code ready as we will not be responsible for the added cost from a trip to the dealership to unlock the radio as we must reset the steering angle sensor if we are able to do so. They also may deny doing a alignment if they cannot reset the steering angle sensor, even if you have already purchased a lifetime alignment package (you should be refunded the cost).

    THAT'S WHAT IS CAUSING A LOT OF ISSUES WITH THE ESP EQUIPPED VEHICLES.

    You need a front-end alignment after installing upper control arms, front springs or front struts.

    JBA Upper Control Arms with Fox Coilover

    Liberty Upper Control Arms

  • Jeep Liberty a-arms, JBA Upper Control Arms

    "Stop wasting money on factory A-arms for your Liberty."

    "JBA Upper Control arms will give you a life time of durability."

    JBA Jeep Liberty upper control arms

    Get the ORIGINAL after market upper control arms

    JBA A arms!

    Dear Friend,

    If you'd like replaceable ball joints, grease able ball joints, heavy duty construction and welded by certified welders, then this might be the most important web page you'll ever read.

    Here's why:

    At JBA we make the original after market upper control arms (UCA) or A-arms for the Jeep Liberty (KJ), we designed them better than Chrysler.

    Now, I know you're probably skeptical. That's normal and healthy. Let me give you three good reasons we can back up what we claim:


    Three Reasons To Believe What I Say

    Reason one: Al Handy designed and built the first set of upper control arms (UCA) or a-arms in 2003! JBA first generation a-arms were born, we are now making the gen 4.5 our best design to date. There are hundreds of Jeepin by Al's a-arms in service all over the word.

    Reason two: I have been designing and fabricating custom product for over 20 years.

    Reason three: JBA a-arms are approved by All J Products, Rocklizards Fabrication and Jeff Daniels Jeep Customizing.

    Here is a summary of the benefits you receive with Al's upper control arms!
    • 3/8 inch more strut clearance than the factory a-arms
    • Ball joints are mounted on an angle to line up with steering knuckle
    • Replaceable ball joints
      • You can replace the ball joint for under $35.00 per control arm
    • Our A-arms work with all lift kits on the market today
    • Three styles of control arms size fits all!
    • Factory front end alignment
    • Red powder coat finish
    • Heavy duty tubing
    • CNC manufactured parts
    • Manufactured in USA

    Now, you're probably wondering how and why we can do all those things.

    Let me explain.

    The JBA Upper A-Arms were designed for your lifted Liberty and will directly replace your stock (UCA) upper control a-arms. The original equipment a-arm hits the spring, which causes premature ball joint failure on Liberty's with a lift kit. The JBA  A-Arms are compatible with all the lift kits on the market today! These A-Arms were designed to fit on 2002 through 2007 Jeep Liberty's. (Now 07 KA & 08 KK) Made of heavy duty tubing, red powder coat finish, with Spicer HD replaceable ball joints and factory rubber bushings. The A arms are assembled and ready to bolt onto your Liberty. Sold as a set, 1 left & 1 right upper control arm (UCA).

    Don't take my word for it.
    Listen to what our customers say.

    Testimonial: Hello JBA

    I just wanted to take a moment to thank you for outstanding product and service. I have had the opportunity to deal with your competition prior to buying my JBA uca's. With those arms installed, my camber was at +1.6 degrees. This was after 3 trips to 2 alignment shops. After many emails because the owner obviously has no voice they finally took them back. Also they informed me that the problem was my installation or setup. Not possible that the arms could be messed up. The installation of your competitions arms it took some persuading to get them to go in. Also when installed they squeaked like crazy!

    When I installed my JBA’s they went in like they were made to fit and one trip to the alignment shop is all it took for a perfect alignment. I have always been one to root for the underdog but, sometimes there is a reason why they are the underdog.

    Thanks again
    Brian Short
    STUMP JUMPER

    Testimonial: Thank you Marlin, Just a note to let you know that I have had the a arms and 3.5 " lift kit on for about a week now, and think that they are great. The jeep rides great and looks really good. I am very glad that I went with your a arms. Plus the service was outstanding! Ordered on a Fri and received on Mon. To any one who reads this, if you have a Jeep Liberty and want to lift it make sure u use Als A Arms.

    __________Rick_Mundell_____OCT 2009________________________

    Testimonial: JBA, Just wanted to let you guys know I received the KJ upper control arms and put them on today. The arms installed fairly easy as I was expecting it to be an all day project. All contact I previously experienced with the ball joint/strut is gone now. Your Gen 4.5 arms have solved the problem I have lived with for a long time. I installed the lift shortly after buying my KJ new back in 02. The noise from the contact issue was very noticeable from the beginning. After having that issue I was concerned about even buying any other aftermarket products for the Jeep, including yours. Problem was once the lift and tires were on the vehicle there was no way I would be removing them, it just looked way too nice. Besides I have yet to see any other lifted Liberty's where I live. Your arms have taken away the concern I have had about imminent ball joint failure from being a reality. I just wanted to thank you for a making a great product that worked great for me.

    James Parker Newark, OH

    Testimonial: They've held up great to all the wheeling I've done on them since they were installed at All-Js on May 24 2008. The arms have held up to Hell's Revenge, Fins $ Things, Porcupine Rim, Lockhart Basin/Hurrah Pass, Long Canyon Road and the White Rim Trail in Canyonlands National Park. Not to mention Big Eye Mine Road, a local trail here in Yuma, AZ.
    I think they've had nearly the same off-road miles as on-road miles since being installed. With these arms matched up with the Frankenlift Premium II kit, it makes a KJ feel like a street car in ride feel, but WAY more capable off-road. I love it!!!
    Thanks for a great product!!!
    Regards,Scott
    Testimonial: http://www.myvirtualpaper.com/doc/JP-Freek/JPF-MVP_opt/2008121201/ Pg 41,

    Adam Rosenfeld

    Jeep Liberty Upper A-arms

    (picture of A-arm and the JBA Adjust-A-Strut Coilover system for the Jeep Liberty)

    Warning: Do NOT make a bad investment in cheep imitation, Get the original upper A-arms for 02'-07' lifted Jeep Liberty's (also 08 KK Liberty's)

    Own the genuine JBA upper control arms (UCA) for your peace of mind!!

    There is a lot of confusion surrounding our field. I want to give you 7 criteria or elements you absolutely, positively must have in any solution you obtain:

    1: Gives your struts clearance!

    2: Replaceable ball joints!

    3: Factory front wheel alignment!

    4: Durability for off road use!

    5: Bolts in the factory pockets in short order!

    6: Factory rubber mounting bushings to isolate road noise! (no squeaking)

    You will never need to replace your upper A-arms for the life of your KJ

    Chrysler's factory control A-arms vs JBA upper a-arms, 3/8" [9.5mm] More Spring Clearance!

    JBA Jeep Liberty upper control arms

    No tire rubbing with JBA Gen 4.5 A-arms!

    Jeep Liberty Upper A-arms

    You get at least 10 times your money's worth!

    I have over $10,000.00 of R&D work into the gen 4.5 upper control arms. I spent month testing different ideas. For a fraction of time and cost you can have a set of JBA a-arms that will out last the factory a-arms 5 to 1.

    In summary, here's what you are investing in:

    Installation instructions, One set of JBA a-arms, 2 Spicer ball joints, 4 mounting bushings, A-arms are full assembled and ready to bolt on your Jeep KJ.

    If you respond right away, your investment is only $430.95 $395.95 plus shipping.

    Act immediately and receive the following bonus

    Since I know it's 100% to your benefit to act right away, I want to sweeten the pot and give you every possible reason to say YES today! If you respond immediately you get report on how to get the most out of your front suspension. Up to 9" of travel!

    You can't lose with our 100%,
    ironclad, money back guarantee

    By the way, the bonus is yours to keep even in the unlikely event you decide to take advantage of our ironclad money back guarantee:

    Your satisfaction is guaranteed with our 100%, no-questions-asked, iron-clad money-back guarantee. If you aren't absolutely thrilled with our product, just contact us (or send the product back) within 6 months and we'll refund 100% of your purchase price. No questions asked!

    Here's how to get involved right now!

    To order JBA Upper A-arms for lifted Jeep Liberty just click the link below

    http://jbaoffroad.com/jba-a-arms/jeep-liberty-kj-upper-a-arms.html

    http://jbaoffroad.com/jba-a-arms/jba-upper-a-arms-for-08-12-lifted-jeep-liberty-s.html

    Place order before 2:00 pm ET and your arms will ship the same day!

    Shipping world wide w/ UPS & USPS!

    Ship next day air for the emergency repair on your daily driver!

    keep on Jeepin,

    Marlin Gehman

    owner

    Jeepin By Al LLC.

    PS: Make your Jeep Liberty ride like a Mercedes-Benz your spouse will thank you! We have the best lift kits for the Jeep Liberty, For the owner who wants the very best lift kit for there Jeep Liberty!

  • Jeep Liberty Long Arm Build

    JBA Texas LongArm Jeep Liberty KK

    This design has been in my head for many years.  When I got a phone call from Nathan he wanted a long arm suspension on his Jeep Liberty KK.  After talking with Nathan I started putting my design in Auto-cad Inventor.  It started to take shape!!

    JBA long arm build on a Jeep Liberty JBA long arms build on a Jeep Liberty

    2016-07-07 11.06.29 JBA long arms build on a Jeep Liberty

    Nathans Jeep was driven from Texas to PA and arrived on January 17, 2016.

    Nathan's KK Before Nathan's KK Before

     

    Parts used on the build

    • 4) ORI struts 14" long14" ORI Struts
    • Currie IFS center diff, Ford 9" with 5:13 gears

    Currie IFS Diff

    • RCV custom CV axlesRCV custom axles
    • Howe Performance power steering pump, reservoir and coolerHowe Performance
    • Grand Cherokee (WK) parts
      • front bearing hubs
      • cut down steering knuckles
      • tie rod ends
    • Chevy suburban string box & Idle arm

    Rear suspension

    The rear is a Dana 44 out of a JK with factory electric locker and 5:13 gears.  We built a custom 3 link mount, to do this we had to remove the fuel tank, muffler and exhaust system. The fuel tank is an modified fuel tank from an old Wrangler. We mounted the fuel tank were the spare tire was mounted from factory.   KK long arm rear diff

    Front suspension

    We started the build by clocking the transfer case to center the front drive shaft. We built a 10" cradle drop to hold the steering box and the Currie diff. The control arms are about 10" longer then the factory a-arms and mounted to the cradle.

    JBA long arms on Jeep Liberty KK

    JBA Texas LongArm Liberty KK

    JBA Long arm KK

    JBA long are suspension

    Jeep Liberty KK. Lift Kit

    Jeep Liberty KK Long Arm Kit

    2016-10-29 17.01.20 2016-10-29 17.01.49
    2016-10-29 17.23.00

4 Item(s)