Tahoe 2007-2018

Tahoe 2007-2018

Select Your Vehicle

Go

2 Items

  • JBA HD Upper Control Arms for 1500 Chevrolet / GMC 2014-2018
    PRE-ASSEMBLED KIT - FITS LIFT TYPE
    Spring Lift or Leveling Kit [1 to 3.5-inch lift]

    Spacer Lift, Leveling kit, and Spring lift kit

    These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

    Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

    Spring Lift with Cradle Drop Kit

    Spring lift kit with Cradle Drop Kit

    These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

    Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

    $680.00
  • Chevy Silverado Upper Control Arms
    PRE-ASSEMBLED KIT - FITS LIFT TYPE
    Spring Lift or Leveling Kit [1 to 3.5-inch lift]

    Spacer Lift, Leveling kit, and Spring lift kit

    These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

    Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

    Spring Lift with Cradle Drop Kit

    Spring lift kit with Cradle Drop Kit

    These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

    Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

    $680.00
A Summary of the Benefits
Made in usa
  1. 1
    Ball joints are mounted on an angle to line up with steering knuckle

    No more premature ball joint failure!

  2. 2
    Replaceable ball joints

    You can replace the ball joint for under $70.00 per control arm.

  3. 3
    Factory front end alignment

    No premature tire wear.

  4. 4
    Red powder coat finish

    Your friends can see you invested in custom arms for your vehicle

  5. 5
    Heavy duty tubing

    Long lasting off road durability.

  6. 6
    CNC manufactured parts

    Precision and consistent parts every time!

  7. 7
    Manufactured in USA

    Made by Americans for ALL!!

Superior Control with JBA Offroad's Upper Control Arms for Lifted Chevy Tahoe

If you're a lifted Chevy Tahoe owner seeking a game-changing solution for your vehicle's suspension system, look no further. JBA Offroad’s Upper Control Arms are here to revolutionize your ride, providing ultimate control and handling.

Advanced Technology and Superior Performance
JBA Upper Control Arms are engineered using cutting-edge technology and innovative design to ensure superior performance. The heart of this innovation lies in our patented JBA EZ Lube Bushings. These bushings feature grease ports and pressure relief valves, which keep the outer face lubricated and prevent extrusion due to over-pressurization. This unique design enhances the performance, durability, and lifespan of the a-arm bushings.

Our bushings are made from Synthetic Elastomer, a long-chained polymer with many urethane constituents. Over the years, we've refined the formula to create a compound that is both stronger and softer—perfect for on and off-road applications. It has a high tensile strength, elasticity, and dynamic load capacity, aiding and tuning suspension geometry while eliminating squeaky polyurethane bushings.

Enhancing Off-Road Capabilities
But the magic doesn't stop there. JBA Upper Control Arms improve off-road capabilities like durability, handling, alignment, and dampening. This is achieved through our unique JBA Ball Joint design, offering an impressive 90-degree range of motion—the widest on the market today! This increased range allows you to tackle even the toughest off-road terrains with ease. And when it comes to maintenance, simply pump 3-4 pumps of grease into the fitting, and you're good to go!

Extending Lifespan of Other Components
By investing in JBA Upper Control Arms, you're not just improving your vehicle's performance—you're also extending the lifespan of other components that may be affected by poor control arm quality. This is a long-term investment in the health and longevity of your Chevy Tahoe.

Customer Testimonies
Don't just take our word for it. Customers who have installed JBA Upper Control Arms on their lifted Chevy Tahoe vehicles report improved handling, better alignment, and a smoother ride. They appreciate the attention to detail, such as the greasable components and replaceable ball joints, which contribute to the product's longevity. Plus, our prompt shipping and clear communication throughout the purchasing process have been commended by customers.

Conclusion
In conclusion, JBA Offroad's Upper Control Arms are a must-have upgrade for lifted Chevy Tahoe owners. With their superior performance, easy installation, and extended lifespan benefits, these control arms provide ultimate control and handling for off-road adventures. So, why wait? Invest in JBA Offroad's Upper Control Arms today and experience the difference in your Chevy Tahoe's suspension system. Your ride will thank you for it!

JBA upper control arms for the lifted Chevy Tahoe fit model years 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, and 2016.