Tundra 2007 - 2021

Enhance your Toyota Tundra’s suspension performance with upper control arms designed to maintain proper alignment after a lift. Whether you’re tackling tough terrain or navigating daily roads, these control arms help correct geometry for improved handling, stability, and tire longevity.

Select Your Vehicle

Year

Make

Model

Pre-Assembled Kit - fits lift type

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA HD HC Upper Control Arms for Toyota Tundra 2007-2021, Sequoia 2008-2021, 1 to 3.5 inch lift

$713.00
Pre-Assembled Kit - fits lift type
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA Cradle Drop Upper Control Arms for Toyota Tundra 2007-2021, Sequoia 2008-2022, 4 to 12 inch lift

$713.00
Replacement Part

JBA Max 90 Ball Joint Boot sets

$18.00
Replacement Part

JBA EZ Lube Bushing Kit

$67.00
Replacement Part

JBA Max 90 Upper Ball Joint

$72.00

See What Our Customers Have Built!

Toyota Tundra 2007 - 2021

The gas hog

JBA Cradle Drop Upper Control Arms for Toyota Tundra 2007-2021, Sequoia 2008-2022, 4 to 12 inch lift

Lift Type:	Cradle Drop
Lift Height:	6"
Tire Size:	318/80 R17 37x12.5 R17 LT

Read this Build

View All Customer Builds

A Summary of the Benefits

1

Ball joints are mounted on an angle to line up with steering knuckle
No more premature ball joint failure!
2

Replaceable ball joints
You can replace the ball joint for under $75.00 per control arm.
3

Factory front end alignment
No premature tire wear.
4

Red powder coat finish
Your friends can see you invested in custom arms for your vehicle
5

Heavy duty tubing
Long lasting off road durability.
6

CNC manufactured parts
Precision and consistent parts every time!
7

Manufactured in USA
Made by Americans for ALL!!
8

3 degrees additional caster
Impove alignmnent through additional added positive caster

Toyota Tundra Upper Control Arms

Upgrade your Toyota Tundra’s suspension with precision-engineered upper control arms designed for lifted trucks and daily drivers alike. These UCAs restore proper alignment, correct caster angles, and provide increased wheel travel to improve handling, stability, and tire wear. If you’ve noticed uneven tire wear, vague steering, or reduced control, replacing your upper control arms is a critical step toward safer and more reliable performance on and off the road. Built in the USA with durable tubular steel and patented EZ Lube bushings, these control arms are trail-tested and daily-driver approved, engineered to outlast harsh terrain and keep your Tundra running strong.

Built for Durability and Precise Fitment

Our Toyota Tundra upper control arms are crafted with heavy-duty materials and expert manufacturing that ensure a perfect fit for 2007-2021 Tundra models with 1-3.5-inch lifts. Equipped with greasable Max 90 ball joints offering the widest range of motion in the market, these UCAs improve suspension articulation and reduce premature wear on suspension parts. The patented EZ Lube bushings allow maintenance without loosening hardware, making service quick and straightforward. Coupled with a powder-coated finish for corrosion resistance, these arms are built to handle real-world trails and tough daily use. Every set comes with a lifetime structural warranty and a full year warranty on bushings and ball joints, backed by our industry-leading 365-day risk-free return policy and responsive customer support.

Looking for a Different Model? Toyota Upper Control Arms | Toyota Tundra 2000-2006 Upper Control Arm | Toyota Tundra 2022 Upper Control Arms
Shop All Upper Control Arms: Upper A Arms

Get Precise Alignment and Safer Handling

Replacing worn or damaged Toyota Tundra upper control arms is essential to prevent bad wheel alignment, premature tire wear, and damage to bushings and ball joints. Our UCAs restore factory suspension geometry and provide added caster correction to optimize steering response and improve on-road stability. With quick next-day shipping from Pennsylvania and direct customer support, you get expert parts shipped fast with no middlemen. Installation is simplified with a bolt-on design, though professional alignment afterward is necessary for the best results. Don’t risk uneven tire wear or suspension failure. Upgrade now with JBA Offroad’s Toyota Tundra upper control arms and take your rig further than ever, backed by engineering you can trust.

Tundra upper control arms

Looking to enhance your off-road capabilities and make your 2007-2021 Toyota Tundra stand out?
Look no further than JBA Offroad's high-quality Toyota Tundra upper control arms (UCAs). Designed specifically for lifted or leveled trucks, our control arms are engineered to improve your truck's performance both on and off the road.

Crafted from strong and durable 1026 DOM tubes, our tubular upper control arms provide the strength and reliability you need for your off-road adventures. With our patented grease port and EZ Lube bushings, maintenance becomes a breeze. Simply use our recommended grease, the Mobilgrease XHP 222 Special, and pump it into the bushings until it comes out between the washers and the bushing. This ensures optimal lubrication and extends the lifespan of the control arms.

Choose from our pre-assembled Tundra control arm kits featuring powder-coated JBA red upper control arms for lifted trucks ranging from 2007 to 2021. Our upper control arms have garnered positive customer testimonials and have a money-back guarantee, ensuring your satisfaction.

When it comes to ball joints, our JBA ball joints offer a 90-degree range of motion and sealed construction, providing you with the widest range of motion available in the market. Additionally, our greaseable ball joints make maintenance hassle-free by simply pumping a few pumps of grease into the fitting.

At JBA Offroad, we understand that every customer has unique adventure interests. That's why we offer a wide range of top-quality off-road products to cater to your specific needs. Whether you enjoy off-roading, camping, fishing, hiking, or any other outdoor activity, our upper control arms are designed to enhance your experience. We have options available for leveling kits, spring lift kits, and cradle drop kits. The 2007 Toyota Tundra upper control arms will also fit up to a 2021 Toyota Tundra.

In conclusion, if you want to elevate your off-road capabilities and maximize the potential of your Toyota Tundra 2007-2021, choose JBA Offroad's high-quality upper control arm kit. With our focus on durability, ease of maintenance, and customer satisfaction, we are proud to provide the best upper control arms for the lifted Tundra. Explore our Tundra products on our website and take your off-road adventures to new heights!

JBA upper control arms for the Toyota Tacoma fit model years 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, and 2021.