JBA

Tacoma 2024 +

Tacoma 2024 +

Select Your Vehicle

Go

1 Item

  • JBA Upper Control Arms for the lifted 2024 Toyota Tacoma
    PRE-ASSEMBLED KIT - FITS LIFT TYPE
    Spring Lift or Leveling Kit [1 to 3.5-inch lift]

    Spacer Lift, Leveling kit, and Spring lift kit

    These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

    Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"
    Spring Lift with Cradle Drop Kit

    Spring lift kit with Cradle Drop Kit

    These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

    Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.
    JBA STD HC Upper Control Arms for Toyota Tacoma 2024 (1 to 3.5 inch lift)
    $608.00
A Summary of the Benefits
Made in usa
  1. 1
    Ball joints are mounted on an angle to line up with steering knuckle

    No more premature ball joint failure!

  2. 2
    Replaceable ball joints

    You can replace the ball joint for under $70.00 per control arm.

  3. 3
    Factory front end alignment

    No premature tire wear.

  4. 4
    Red powder coat finish

    Your friends can see you invested in custom arms for your vehicle

  5. 5
    CNC manufactured parts

    Precision and consistent parts every time!

  6. 6
    Manufactured in USA

    Made by Americans for ALL!!

  7. 7
    3/4 inch more down travel

    Adds 3/4 inch more down travel just by changing your upper controll arms