Upper Control Arms for 2016 Toyota Sequoia

Select Your Vehicle

Go

2 Items

  • JBA Offroad Cradle Drop Upper A-arms for the Tundra 2007-2021
    PRE-ASSEMBLED KIT - FITS LIFT TYPE
    Cradle Drop Kit [4 to 12-inch lift]

    Cradle Drop Kit

    Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

    • This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
    $660.00
  • JBA HD Upper A-arms for the Tundra 2007-2021
    PRE-ASSEMBLED KIT - FITS LIFT TYPE
    Spring Lift or Leveling Kit [1 to 3.5-inch lift]

    Spacer Lift, Leveling kit, and Spring lift kit

    These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

    Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

    Spring Lift with Cradle Drop Kit

    Spring lift kit with Cradle Drop Kit

    These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

    Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

    $660.00