JBA

Chevrolet

Chevrolet

Select Your Vehicle

Go

2 Items

  • Chevy Silverado Upper Control Arms
    Pre-Assembled Kit - fits lift type
    Spring Lift or Leveling Kit [1 to 3.5-inch lift]

    Spacer Lift, Leveling kit, and Spring lift kit

    These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

    Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"
    Spring Lift with Cradle Drop Kit

    Spring lift kit with Cradle Drop Kit

    These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

    Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.
    JBA HD Upper Control Arms for 1500 Chevrolet / GMC 2007-2018
    $680.00
  • JBA Upper Control arms for Chevy Colorado
    Pre-Assembled Kit - fits lift type
    Spring Lift or Leveling Kit [1 to 3.5-inch lift]

    Spacer Lift, Leveling kit, and Spring lift kit

    These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

    Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"
    Spring Lift with Cradle Drop Kit

    Spring lift kit with Cradle Drop Kit

    These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

    Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.
    JBA upper control arms for a lifted Colorado/Canyon
    $460.00
A Summary of the Benefits
Made in usa
  1. 1
    Ball joints are mounted on an angle to line up with steering knuckle

    No more premature ball joint failure!

  2. 2
    Replaceable ball joints

    You can replace the ball joint for under $70.00 per control arm.

  3. 3
    Factory front end alignment

    No premature tire wear.

  4. 4
    Red powder coat finish

    Your friends can see you invested in custom arms for your vehicle

  5. 5
    Heavy duty tubing

    Long lasting off road durability.

  6. 6
    CNC manufactured parts

    Precision and consistent parts every time!

  7. 7
    Manufactured in USA

    Made by Americans for ALL!!

Transform Your Ride with JBA Offroad's Upper Control Arms for Lifted Chevy Trucks

Do you own a lifted Chevy truck and want to upgrade your vehicle's suspension system? If so, you're in the right place. JBA Offroad’s Upper Control Arms are here to revolutionize your ride, providing unparalleled control and handling.

Superior Performance with Advanced Technology
Our Upper Control Arms, designed specifically for lifted Chevy trucks, offer superior performance compared to other control arms on the market. This is made possible by our use of advanced technology and high-quality materials. These control arms are crafted from 1026 DOM A513-5 Domestic Tubing and finished with a sleek red powder coat for durable corrosion resistance.

But we didn't stop at aesthetics. Our Upper Control Arms come with replaceable ball joints and feature our patented JBA EZ Lube Bushings—U.S. Patent No. 11,293,511—for easy maintenance. What's more, these control arms boast 3 degrees of built-in caster, significantly enhancing your vehicle's handling and stability.

The Game-Changer: JBA EZ Lube Bushings
At the heart of our Upper Control Arms are the JBA EZ Lube Bushings. We've added grease ports and pressure relief valves to keep the outer face of the bushings lubricated, preventing extrusion due to over-pressurization. This simple yet innovative design change increases the performance, durability, and lifespan of the a-arm bushings.

The maintenance procedure for these bushings is straightforward: pump grease into them until you see it seep out between the washers and the bushing. For optimal results, we recommend using Mobilgrease XHP 222 Special grease.

These bushings are crafted from Synthetic Elastomer, a long-chained polymer filled with urethane constituents. Over the years, we've refined this compound to be stronger yet softer, making it perfect for both on and off-road applications. The result? Higher tensile strength, elasticity, and dynamic load capacity. Say goodbye to squeaky polyurethane bushings and hello to improved suspension geometry!

Enhancing Off-Road Capabilities
JBA Upper Control Arms are not just about a smoother ride—they're also designed to enhance your vehicle's off-road capabilities. These control arms improve durability, handling, alignment, and dampening, thanks to our unique JBA Ball Joint design.

Our ball joints offer an impressive 90-degree range of motion—the widest on the market today! This increased range allows you to tackle even the toughest off-road terrains with ease. Plus, these ball joints are made from 4140 steel, ensuring robustness and longevity. And when it comes to maintenance, simply pump 3-4 pumps of grease into the fitting, and you're good to go!

Assembly Process and Installation Guide
Our Upper Control Arms come with everything required for a smooth installation process—8 synthetic elastomer bushings, 4 steel sleeves, and a washer kit as needed per vehicle. With a little bit of time and effort, you can install the control arms within 1-3 hours.

But don't worry—we're here to guide you every step of the way. Our dedicated customer service team is always ready to answer any queries and assist you throughout the installation process.

Extending the Lifespan of Other Components
By investing in JBA Upper Control Arms, you're not just enhancing your vehicle's performance—you're also extending the lifespan of other components that may be affected by poor control arm quality. This is a long-term investment in the health and longevity of your Chevy truck.

Real-Life Customer Testimonies
We could tell you all about the benefits of our Upper Control Arms, but we think our customers say it best. Users report improved handling, better alignment, and a smoother ride after installing our product. They appreciate the attention to detail, such as the greasable components and replaceable ball joints, which contribute to the product's longevity. Plus, our prompt shipping and clear communication throughout the purchasing process have been commended by customers.

A Solid Investment
In conclusion, JBA Offroad's Upper Control Arms are a must-have upgrade for lifted Chevy truck owners. With their superior performance, easy installation, and extended lifespan benefits, these control arms provide ultimate control and handling for off-road adventures. So, why wait? Invest in JBA Offroad's Upper Control Arms today and experience the difference in your Chevy truck's suspension system. Your ride will thank you for it!

Remember, our Upper Control Arms come with a lifetime warranty on the structural integrity and a one-year warranty on ball joints, bushings, and powder coating. This is not just a purchase—it's a solid investment in your vehicle's future. Get ready to elevate your ride with JBA Offroad's Upper Control Arms!

JBA upper control arms for the Chevy 4x4 trucks fit model years 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, and 2022.