JBA Upper Control Arms

PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

JBA STD High Caster Upper Control Arms for Toyota Tacoma 2005-2023 (1 to 3.5 inch lift)

$558.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA HD High Caster Upper Control Arms for Toyota Tacoma, 4Runner, FJ Cruisers, Lexus GX470, Lexus GX460 (1 to 3.5 inch lift)

$790.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA STD High Caster Upper Control Arms for Toyota Tacoma, 4Runner 1996-2004 (1 to 3.5 inch lift)

$570.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA STD HC Upper Control Arms for Toyota Tundra '00-'06, Sequoia '01-'07 (1 to 3.5 inch lift)

$570.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA HD HC Upper Control Arms for Toyota Tundra 2007-2021, Sequoia 2008-2021, 1 to 3.5 inch lift

$660.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA Upper Control Arms for Lifted RAM 1500 2006 - Current (1 to 3.5 inch lift)

$625.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA Upper Control Arms for lifted Grand Cherokee & Commander 2005-2010

$540.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

JBA Upper Control Arms for SRT8 Grand Cherokee 2005-2010

$540.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA Upper Control Arms for lifted Jeep Grand Cherokee/Dodge Durango 2011-2015

$540.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA HD Upper Control Arms for 1500 Chevrolet / GMC 2007-2018

$680.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

JBA Upper Control Arms for 2002-2007 lifted Jeep Liberty's

$475.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

JBA Upper Control Arms for lifted Jeep Liberty's 2008-2012 , Dodge Nitro 2007-2012

$475.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA UCAs for Toyota Tacoma, 4Runner, FJ Cruisers, Lexus GX470, Lexus GX460 2003-2023 (4 to 12 inch lift)

$790.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA Cradle Drop Lift Kit Upper Control Arms for Ford F150 2004 - 2020, 4 to 12 inch lift

$590.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA Cradle Drop Upper Control Arms for Ford F150 2021 Plus, 4 to 12 inch lift

$590.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA Upper Control Arms for 2021 Plus Ford F150, 1 to 3.5 inch lift

$590.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA HD Upper Control Arms for Toyota Tundra 2022 Plus, Sequoia 2023 Plus (4 to 12 inch lift)

$660.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA Cradle Drop Upper Control Arms for Toyota Tundra 2007-2021, Sequoia 2008-2022, 4 to 12 inch lift

$660.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA HD HC Upper Control Arms for Toyota Tundra 2022 Plus, Sequoia 2023 Plus (1 to 3.5 inch lift)

$660.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA Upper Control Arms for Ford Bronco 2021- Plus (1 to 3.5 inch lift)

$590.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA Upper Control Arms for Ford Bronco 2021- Plus, 4 to 12 inch lift

$590.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA Upper Control Arms for 2004 - 2020 Ford F150 (1 to 3.5 inch lift)

$590.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA Stock Geometry Upper Control Arms for Ford F150 2004 - 2020

$590.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA Cradle Drop Upper Control Arms for RAM 1500 2006 - Current (4 to 12 inch lift)

$625.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

JBA STD High Caster Upper Control Arms for Lexus GX470, Lexus GX460 2003-2023 (1 to 3.5 inch lift)

$558.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

JBA STD High Caster Upper Control Arms for Toyota FJ Cruisers (1 to 3.5 inch lift)

$558.00
PRE-ASSEMBLED KIT - FITS LIFT TYPE

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

JBA STD High Caster Upper Control Arms for Toyota 4Runner 2003-2024 (1 to 3.5 inch lift)

$558.00

A Summary of the Benefits

1

Ball joints are mounted on an angle to line up with steering knuckle
No more premature ball joint failure!
2

Replaceable ball joints
You can replace the ball joint for under $70.00 per control arm.
3

Factory front end alignment
No premature tire wear.
4

Red powder coat finish
Your friends can see you invested in custom arms for your vehicle
5

Heavy duty tubing
Long lasting off road durability.
6

CNC manufactured parts
Precision and consistent parts every time!
7

Manufactured in USA
Made by Americans for ALL!!
8

3 degrees additional caster
Impove alignmnent through additional added positive caster
9

3/4 inch more down travel
Adds 3/4 inch more down travel just by changing your upper controll arms

JBA Offroad upper control arms

Welcome to JBA Offroad: Your Gateway to Unforgettable Off-Roading Adventures
Gearing up for an adrenaline-pumping off-roading quest? Look no further! At JBA Offroad, we specialize in transforming your off-roading dreams into reality. Be it rock crawling, desert racing, mud bogging, or trail riding, our top-tier offroad upper control arms (UCA) are meticulously designed to cater to a wide array of off-road activities. We're not just about enhancing your off-roading experience — we're about defining it.

JBA Offroad — A Name Synonymous with Performance, Strength, and Durability
In the world of off-roading, the name JBA Offroad stands out as a beacon of reliability. Our unwavering commitment to delivering unmatched performance, exceptional strength, and enduring durability sets us apart from the rest. Our secret sauce? A potent blend of high-quality materials, cutting-edge technology, and a tireless dedication to excellence.

Every single one of our upper control arms is a testament to our relentless pursuit of perfection. They're not just built; they're crafted — with precision, passion, and an uncompromising attention to detail. Designed specifically to withstand the harshest off-road conditions, these sturdy warriors are all set to be your reliable companions in every off-road escapade.

Our extensive experience in the industry, coupled with our proven track record, has made us a trusted leader among off-roading enthusiasts. But don't just take our word for it. Dive into the world of JBA Offroad and experience the difference firsthand.

JBA Upper Control Arms: Your Trusted Companion in Every Adventure
Adventure is not just a destination; it's a journey. And at JBA Offroad, we understand that every journey demands a reliable companion. Enter our JBA upper control arms — your trusted partner in every off-road adventure.

Our JBA upper control arms are engineered for the thrill-seekers, the trailblazers, and the adventurers. Offering superior handling both on and off the road, these control arms come with built-in caster that significantly improves high-speed stability and cornering. With our upper control arms at your service, every ride is a smooth sail, every turn a breeze.

But that's not all. What truly sets our JBA upper control arms apart is their innovative EZ lube bushings with grease ports and check valves. This feature eliminates the need to loosen mounting bolts for grease release, saving you valuable time and effort. All you need to do is pump grease until it emerges between the washers and the bushing, and voila! You're all set for your next adventure.

Quality That Speaks for Itself
Quality is not just a benchmark at JBA Offroad; it's a promise — a promise that we deliver with every product we offer. Our upper control arms are no exception.

Crafted from top-quality American-made steel tubing, our upper control arms are as robust as they come. A sturdy red powder-coat finish adds an extra layer of durability, making sure your control arms stand the test of time and terrain.

But the true stars of the show are the replaceable ball joints that come with our upper control arms. Offering a remarkable 90-degree range of motion — the widest you'll find on the market today — these ball joints ensure your ride is smooth, even over the roughest terrains. To top it all off, these ball joints are encased in a sealed boot, offering added protection and longevity.

Catering to a Wide Array of Models
At JBA Offroad, we believe in inclusivity. That's why our JBA upper control arms are designed to cater to a wide array of vehicle models. Whether you own a Toyota Tacoma, 4Runner, FJ Cruisers, Lexus GX470, Lexus GX460, Dodge Ram, Ford F-150, Jeep Grand Cherokee, Nissan Xterra, Frontier, Pathfinder, Chevrolet Silverado, GMC Sierra, or anything in between, we've got you covered.

For those who prefer their vehicles lifted, we offer lifted upper control arms specially designed for lifted vehicles like the Colorado/Canyon and Toyota Tundra. No matter what your ride, JBA Offroad has the perfect upper control arm to enhance wheel alignment, articulation, and overall performance.

Our Promise: A Lifetime of Quality
At JBA Offroad, we don't just sell products; we build relationships. And like any strong relationship, ours is built on trust — a trust that we strive to earn with every product we offer.

That's why all our upper control arms come with a lifetime warranty on structural integrity and a one-year warranty on ball joints, bushings, and powder coating. Because at JBA Offroad, we believe in standing by our products just as they stand by you on every off-road journey.

Ready to Upgrade Your Off-Road Experience?
So, are you ready to elevate your off-road experience to new heights? Are you ready to venture into uncharted territories with unmatched confidence? If the answer is yes, then it's time to explore our wide range of JBA upper control arms.

Join the JBA Offroad family today, and feel the JBA difference on your next adventure. Because with JBA Offroad, every journey is an adventure, and every adventure is a story worth telling. Welcome aboard — let's write your off-roading story together!