JBA Upper Control Arms for SRT8 Grand Cherokee 2005-2010

$540.00

Sku#: JBA-6.55.00.EZ

Pre-Assembled Kit - fits lift type

JBA Upper Control Arms for SRT8 WK (lowered Jeep WK) 2005-2010

Will Not fit lifted Jeeps!

High Demand - Available with a Longer Shipping Time

Typically ships within 24 hours on business days

Qty

What included

2 Symmetrical upper controll arms
2 JBA Max 90 ball joints
8 synthetic elastomer a-arm bushings
1 Bushing washer kit
4 steel bushing sleeves
Installation Instructions
2 JBA sticker 6 x 1

Product Specs

Weight: 17 lbs
Type: 1026 DOM A513-5 Domestic Tubing 1.06" OD x 0.75" ID
Install time: 3-6 Hours

Details

The JBA Value Pack

JBA Max 90 Ball Joints™
Patented JBA EZ Lube Bushings™
JBA Lifetime Warranty
JBA 365-day Return Policy
JBA Installation Book
JBA Stickers

JBA Upper Control Arms are assembled and ready to bolt into your SRT8 WK (lowered Jeep WK) 2005-2010.

American-made steel tubing, red powder-coat finish, replaceable ball joints, 2 grease ports for the JBA EZ lube bushings, and 1 grease port for the ball joint.

Note: Left and Right UCAs are symmetrical.

Learn more

Fitment

Year	Make	Model
2005 - 2010	Jeep	SRT8 Grand Cherokee

Maintenance

Every 3,000-5,000 miles: Grease the ball joint with lithium complex grease fortified with moly, until you see the boots swell (3-4pumps). Grease the arm bushings with the same grease until you see grease pushing out from the EZ Lube ports.

Product faqs

Why synthetic elastomer bushings?

Synthetic Elastomer is a long-chained polymer with many urethane constituents. Over the years the formulation has evolved to yield stronger, yet softer compounds ideal for on and off-road applications. As the compound advanced to yield higher tensile strength, elasticity, and dynamic load capacity, JBA uses the bushing to help aid and tune suspension geometry and they will not squeak like polyurethane bushings.

Additional information

The Ball Joint Range of Motion:

Up travel is 40 degrees off the centerline of the ball joint.
Down travel is 50 degrees off the centerline.
Full range of motion is 90 degrees.
Cerakote clear to protect the ball joint.

The Jeepin' By Al Upper A-Arms were designed for your lowered Grand Cherokee(WK)SRT8 and will directly replace your stock upper a-arms. The original upper control arm equipment is not designed to give a good front-end alignment, which causes premature tire failure on a Jeep with a lowering kit.

JBA UCAs give you MORE!