JBA UCAs for Toyota Tacoma, 4Runner, FJ Cruisers, Lexus GX470, Lexus GX460 2003-2023 (4 to 12 inch lift)

$790.00

Sku#: JBA-7.05.00.EZ

Pre-Assembled Kit - fits lift type

Cradle Drop Kit [4 to 12-inch lift]

The JBA Upper A-arms were designed to directly replace your stock upper A-arms.

In Stock Ready to Ship

Typically ships within 48 hours on business days

Qty

What included

1 Right UCA
1 Left UCA
2 JBA Max 90 ball joints
8 synthetic elastomer a-arm bushings
1 Bushing washer kit
4 steel bushing sleeves
Installation Instructions
2 JBA sticker 6 x 1

Product Specs

Weight: 22 lbs
Type: 1026 DOM A513-5 Domestic Tubing 1.313" OD x 1.00" ID
Install time: 1-3 Hours

Details

Fits the Toyotas with a cradle drop lift kit that needs stock geometry arms.
Works with lifts 4 to 12 inches.

Toyota Tacoma 2005-2023
4Runner 2003-2024
FJ Cruisers 2007-2014
Lexus GX470 2003-2009
Lexus GX460 2010-2023

Also fits Toyota's WITHOUT a lift kit.

The JBA Value Pack

JBA Max 90 Ball Joints™
Patented JBA EZ Lube Bushings™
JBA Lifetime Warranty
JBA 365-day Return Policy
JBA Installation Book
JBA Stickers

JBA Upper Control Arms are assembled and ready to bolt onto your vehicle!

American-made steel tubing, red powder-coat finish, replaceable ball joints, 2 grease ports for the JBA EZ lube bushings, and 1 grease port for the ball joint.

Note: Left and Right UCAs are not symmetrical.

The Gen 7.05.00.EZ A-arms for a stock Toyota (No Lift Kit)
Not for use on vehicles with a spring lift or leveling kits.
Works with cradle drop lift kit with new steering knuckles.

Learn more

Fitment

Year	Make	Model
2003 - 2024	Toyota	4Runner
2007 - 2014	Toyota	FJ Cruisers
2010 - 2023	Lexus	GX460
2003 - 2009	Lexus	GX470
2005 - 2023	Toyota	Tacoma

Fits lift type

Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

These kits, like the factory stock suspension, keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit
- This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.

Maintenance

Every 3,000-5,000 miles: Grease the ball joint with lithium complex grease fortified with moly, until you see the boots swell (3-4pumps). Grease the arm bushings with the same grease until you see grease pushing out from the EZ Lube ports.

Product faqs

Why synthetic elastomer bushings?

Synthetic Elastomer is a long-chained polymer with many urethane constituents. Over the years the formulation has evolved to yield stronger, yet softer compounds ideal for on and off-road applications. As the compound advanced to yield higher tensile strength, elasticity, and dynamic load capacity, JBA uses the bushing to help aid and tune suspension geometry and they will not squeak like polyurethane bushings.