JBA Stock Replacement Upper A-arms for Toyota Tacoma "05" Plus, 4Runner "03" Plus, FJ Cruisers "07" Plus
The JBA Upper A-Arms were designed for your stock Toyota and will directly replace your stock upper a-arms.
Also fits the Toyotas with a cradle drop lift kit.
Toyota Tacoma "05" Plus, 4Runner "03" Plus, FJ Cruisers "07" Plus, Lexus GX470 03-09, Lexus GX460 2010 Plus, Toyota's With OUT a lift kit.
The JBA Upper A-Arms, upper control arms (UCAs) were designed for your STOCK Toyota Tacoma "05" Plus, 4Runner "03" Plus, FJ Cruisers "07" Plus, Lexus GX470 03-09, Lexus GX460 2010 Plus and will directly replace your stock upper a-arms. These A-Arms (UCAs) were designed to fit Toyota Tacoma, 4Runner, FJ. Made of heavy duty tubing, red powder coat finish, with replaceable ball joints and factory rubber bushings. The A arms (UCAs) are assembled and ready to bolt onto your Toyota Tacoma, 4Runner, or FJ.
Sold as a set, 1 left & 1 right UCA.
You get 2 arms with ball joints, JBA EZ Lube bushing kit and 2 JBA stickers. JBA arms are assembled and ready to bolt into your vehicle.
Not for use on vehicles with a spring lift or leaaveling kits.
Will work with cradle drop kit with new stering knuckles.
The Ball joint range of motion
- Up travel is 40 deg off of center line of the ball joint.
- Down travel is 50 deg off of center line.
- Full range of motion is 90 deg.
- Say good by to the Uniball!
Note: there is a left & right side, they are not symmetrical.
- More articulation, See JBA vs Uniball
- Replaceable ball joints
- Greaseable ball joints
-
Red powder coat finish
-
Heavy duty tubing
-
Sold as a set
- Made in USA!!
Place order before 12:00 am ET and your arms will ship the same day!
Variant | 1 |
---|