GET THE ORIGINAL RED

Upper Control Arms

Upper Control Arms

Select Your Vehicle

Go

MADE TO FIT YOUR LIFTED VEHICLE ...

JBA SETTING THE STANDARDS

Rebuildable item
Rebuildable Ball Joint

See why the JBA ball joint works best for the weekend warrior.

*EZ LUBE Bushing U.S. Patent No. 11,293,511

90 range item
90°Range of Motion

The JBA Ball Joint gives you 90 degrees range of motion.

*EZ LUBE Bushing U.S. Patent No. 11,293,511

JBA EZ Lube Bushings
JBA EZ Lube Bushings

Introducing our proprietary EZ Lube bushings! Patented Grease channels and pressure relief valves*

U.S. Patent No. 11,953,070

YOU ARE IN CONTROL WHEN

JBA RED IS IN YOUR WHEEL WELLS.

Offroading is not your everyday experience. We know it's risky climbing over those obstacles. We want you to have total confidence in your rig to get you over those hurdles. Giving you a smooth, quiet ride and low-maintenance upper control arms is what we stand by when you put JBA Red in your wheel wells. Our upper control arms have made it all over the world to help those in extreme environments!

We had an urgent need for reliable upper control arms for the Toyota Trucks operating in the Jungle. I contacted Marlin, and the process started. With a few modifications to his prototype arms, they are now the strongest and most reliable upper control arms for a Toyota truck, hands down. Almost all of the other manufacturers' arms only last a few months before they rattle and squeak. Jba Arms are fully serviceable and last a very long time in harsh conditions. It's the only upper control arm used on all my builds.

Milo Willi

Guyana, South America

PROUDLY MANUFACTURED IN THE USA

check We have a 16,000 sq ft manufacturing facility located in Souderton Pennsylvania, USA.

check We are on our way to manufacturing everything in-house.

check We machine all the ball joint parts and bushing bongs.

 

check We cut and bend all the tubing and weld all the control arms.

check We outsource laser cutting & powder coating but we keep it local in PA.

checkOur ball joint boots and bushings are custom-made for JBA Offroad by an Australian-based company.

made in usa
Featured Products

JBA STD High Caster Upper A-arms for 2005-14 Toyota
PRE-ASSEMBLED KIT
Spring Lift or Leveling Kit [1 to 3.5-inch lift]

Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit

Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

$558.00
JBA STD High Caster Upper A-arms for 2005-14 Toyota
PRE-ASSEMBLED KIT
Spring Lift or Leveling Kit [1 to 3.5-inch lift]

Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit

Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

$558.00
JBA STD High Caster Upper A-arms for 2005-14 Toyota
PRE-ASSEMBLED KIT
Spring Lift or Leveling Kit [1 to 3.5-inch lift]

Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit

Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

$558.00
DO NOT MAKE A BAD INVESTMENT IN CHEAP IMITATIONS

GET THE ORIGINAL

AFTERMARKET UPPER CONTROL ARMS

DO NOT MAKE A BAD INVESTMENT IN CHEAP IMITATIONS

At Jeepin by Al (JBA) we make the original after-market upper control arms (UCA) or A-arms for the Jeep Liberty (KJ), we designed them better than Chrysler. Al Handy designed and built the first set of upper control arms (UCA) or a-arms in 2003! JBA first generation a-arms were born, and we are now making the gen 4.5 our best design to date. There are Thousands of JBA a-arms in service all over the word.

GET 10 TIMES

YOUR MONEY'S WORTH!

OUTLAST THE FACTORY A-ARMS 5 TO 1

Offroading is not your everyday experience. We know it's risky climbing over those obstacles. We want you to have total confidence in your rig to get you over those hurdles. Giving you a smooth, quiet ride and low-maintenance upper control arms is what we stand by when you put JBA Red in your wheel wells. Our upper control arms have made it all over the world to help those in extreme environments!

GET 10 TIMES
YOUR MONEY'S WORTH!