FJ Cruisers 2007 - 2014

Select Your Vehicle

Year

Make

Model

Pre-Assembled Kit - fits lift type

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

JBA STD High Caster Upper Control Arms for Toyota FJ Cruisers (1 to 3.5 inch lift)

$558.00
Pre-Assembled Kit - fits lift type

Spring Lift or Leveling Kit [1 to 3.5-inch lift]
Spacer Lift, Leveling kit, and Spring lift kit

These kits cause the upper arms to angle downward toward the ball joints. The Leveling kit or strut lift removes the factory rake angle by lifting the front level with the rear of the vehicle.

Spring kits remove the factory rake angle and lift the rear of the vehicle about 1.5" - 2.5"

Spring Lift with Cradle Drop Kit
Spring lift kit with Cradle Drop Kit

These kits cause the upper arms to angle downward toward the ball joints. The cradle drop lift, cross-member drop, or drop bracket lift kit with spring kits.

Example: 4" cradle drop lift with a 2" spring/coil over lift = 6" lift kit. 6" cradle drop lift with a 2" spring/coil over lift = 8" lift kit. When the mounting holes are offset by 4" and the kit is a 6" kit, the other 2 inches are made up from the strut lift or spring lift.

JBA HD High Caster Upper Control Arms for Toyota Tacoma, 4Runner, FJ Cruisers, Lexus GX470, Lexus GX460 (1 to 3.5 inch lift)

$790.00
Pre-Assembled Kit - fits lift type
Cradle Drop Kit [4 to 12-inch lift]
Cradle Drop Kit

Like the factory stock suspension, these kits keep the upper arms level. cradle drop lift, cross-member drop, or drop bracket lift kit

This style kit relocates the lower control arms on the front of the vehicle using a drop bracket. These brackets offset the lower control mounting holes by 4", 6", or 8". These kits also include longer steering knuckles to fit within the bigger gap between the upper and the lower ball joints.
JBA UCAs for Toyota Tacoma, 4Runner, FJ Cruisers, Lexus GX470, Lexus GX460 2003-2023 (4 to 12 inch lift)

$790.00
Replacement Part

JBA Max 90 Upper Ball Joint

$67.00
Replacement Part

JBA EZ Lube Bushing Kit

$62.00
Replacement Part

JBA Max 90 Ball Joint Boot sets

$16.50
Replacement Part

JBA 7.0 Washer Kit

$9.95
JBA Max 90 Ball Joint Rebuild kit

$69.00
JBA A-arm Hardware Kit

$7.20

A Summary of the Benefits

1

Ball joints are mounted on an angle to line up with steering knuckle
No more premature ball joint failure!
2

Replaceable ball joints
You can replace the ball joint for under $70.00 per control arm.
3

Factory front end alignment
No premature tire wear.
4

Red powder coat finish
Your friends can see you invested in custom arms for your vehicle
5

Heavy duty tubing
Long lasting off road durability.
6

CNC manufactured parts
Precision and consistent parts every time!
7

Manufactured in USA
Made by Americans for ALL!!
8

3 degrees additional caster
Impove alignmnent through additional added positive caster
9

3/4 inch more down travel
Adds 3/4 inch more down travel just by changing your upper controll arms

Elevate Your Off-Roading Experience with JBA Upper Control Arms for Lifted Toyota FJ Cruiser

Whether you're an off-roading enthusiast or a daily driver who enjoys an occasional off-road adventure, you understand that a reliable suspension system is key to unlocking your vehicle's full potential. That's where JBA Upper Control Arms come into play. Engineered specifically for lifted Toyota FJ Cruisers, these control arms are the ultimate upgrade for your off-road experience.

Introducing JBA Upper Control Arms
JBA Upper Control Arms are a significant improvement over the stock control arms. Constructed from American-made steel tubing and coated with a red powder-coat finish for durability and corrosion resistance, they're designed to stand up to the harshest of terrains and weather conditions.

What sets them apart is their proprietary ball joint design. Offering a 90-degree range of motion—unlike the typical 66 degrees provided by Uni-Balls or spherical bearings—these ball joints are sealed to prevent debris and the elements from causing premature wear.

Solving Alignment Issues Post-Lift
Lifting a Toyota FJ Cruiser can often lead to alignment issues, but not with JBA Upper Control Arms. These control arms provide benefits such as improved alignment, increased articulation, and reduced body roll.

So what does this mean for you? Improved handling and smoother rides, both on and off-road. Plus, with 3 degrees of built-in caster, you'll experience better handling on highways and off-roading trails alike.

Strength, Durability, and Superior Design
The strength and durability of JBA Upper Control Arms come from their robust construction and superior design. They're built in a 16,000 sq ft manufacturing facility located in Souderton, Pennsylvania, USA, ensuring quality and precision in every product.

But it's not just about the build—it's also about the maintenance. JBA Upper Control Arms feature our patented EZ Lube Bushings (U.S. Patent No. 11,293,511), equipped with unique grease ports and pressure relief valves. These bushings won't get extruded from the housing due to over-pressurization with too much grease, increasing their performance, durability, and lifespan.

Improving Off-Road Performance
The JBA Upper Control Arms are designed to work with most spring lifts and leveling kits up to 4 inches. If you're considering installing oversized tires after lifting your FJ, these control arms help prevent premature ball joint failure caused by excess stress.

Our customers often share their experiences, like this one: "Ever since I installed JBA's upper control arms on my lifted FJ, I've noticed a significant improvement in handling and overall ride quality. This upgrade was worth every penny."

Conclusion
In conclusion, JBA Upper Control Arms for the lifted Toyota FJ Cruiser are more than just an upgrade—they're a necessity for off-road enthusiasts. With improved handling, increased stability, and exceptional durability, they offer optimal performance in challenging terrains. Ready to elevate your off-road experience? Choose JBA Upper Control Arms today!

If you have any questions or need assistance, please reach out to our Customer Support Center and email us at [email protected]. We're here to help!

JBA upper control arms for the Toyota FJ Cruiser fit model years 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.